Removing The Secondary Transfer Outer Roller - Canon imageRUNNER ADVANCE C2030 Service Manual

4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Secondary Transfer Outer Roller
6) Push the Multi-purpose Tray Separation Pad in the direction of the arrow to secure it.
CAUTION:
Check that there is no gap between the Multi-purpose Tray Separation Pad and the
Multi-purpose Tray Separation Pad Holder.
Multi-purpose Tray
Separation Pad
Multi-purpose Tray
Separation Pad Holder
7) Install the Multi-purpose Tray Pickup Roller Cover.
4 Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Secondary Transfer Outer Roller
F-4-176
Multi-purpose Tray
Separation Pad
Gap
Multi-purpose Tray
Separation Pad Holder
F-4-177

Removing the Secondary Transfer Outer Roller

CAUTION:
Do not touch the surface of the Secondary Transfer Outer Roller.
Procedure
1) Open the Right Lower Cover fully.
2) Hold the both edges of the Secondary Transfer Outer Roller, and remove it in the direction
of the arrow.
Points to Note at Installation:
Be sure not to remove the Protection Sheet on a new Secondary Transfer Outer Roller.
Roller Protection Sheet
4-90
F-4-178
F-4-179
4-90