Procedure For Clearing The Counter Of The Secondary Transfer Outer Roller / Fixing Refresh Roller - Canon imagePRESS C800 Series Operator's Maintenance Manual

1
Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Secondary Transfer Outer Roller / Fixing Refresh Roller
■ Procedure for Clearing the Counter of the Secondary Transfer
Outer Roller / Fixing Refresh Roller
NOTE:
• When clearing the counter of the Secondary Transfer Outer Roller, perform 1-1.
• When clearing the counter of the Fixing Refresh Roller, perform 1-2.
1-1) In the Warning or Replaceable Parts screen, select [Secondary Transfer Outer Roller],
and press [Counter Operation].
1-2) In the Warning or Cleanable Parts screen, select [Fixing Refresh Roller], and press
[Counter Operation].
1 Initial Setup > Basic Operation > Clearing the Counter > Procedure for Clearing the Counter of the Secondary Transfer Outer Roller / Fixing Refresh Roller
-> The confirmation screen for clearing the counter will appear.
2) Press [Yes].
-> The count clear completion screen will appear.
Count clear can be executed whether in the Replacement/Cleaning mode or not. If executing
count clear in the Replacement/Cleaning mode, the message will be shown on the screen to
F-1-24 confirm Replacement/Cleaning mode termination after clear.
F-1-25
1-14
F-1-26
F-1-27
F-1-28
1-14