4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Cassette 1 Pickup Roller
Removing the Cassette 1 Pickup Roller
CAUTION:
Do not touch the roller surface of the Cassette 1 Separation Roller Unit, Secondary
Transfer Outer Roller, and the Registration Roller.
Preparation
1) Remove the Cassette 1 Separation Roller Unit.
Procedure
1) Remove the Cassette 1 Pickup Roller in the direction of the arrow.
2) Align the Cassette 1 Pickup Roller with a shaft hole, and install it in the direction of the
arrow.
Shaft hole
Cassette 1 Pickup Roller Unit
4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Cassette 1 Pickup Roller
CAUTION:
Be sure that there is no gap at [A] part of the Cassette 1 Pickup Roller after installation.
By turning [B] part, the roller is fit into the installation position.
F-4-149
F-4-150
4-81
F-4-151
4-81