4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Cassette 1 Pickup Unit
Removing the Cassette 1 Pickup Unit
CAUTION:
Do not touch the roller surface of the Cassette 1 Separation Roller Unit, Secondary
Transfer Outer Roller, and the Registration Roller.
Preparation
1) Remove the Cassette 1 Separation Roller Unit.
2) Remove the ITB Unit.
Procedure
1) Close the Right Lower Cover, and remove the screw of the Pickup Guide.
2) Open the Right Lower Cover fully.
4
Parts Replacement and Cleaning > Disassembly/Assembly - Pickup Feed System - > Removing the Cassette 1 Pickup Unit
3) Remove the Pickup Guide in the direction of the arrow.
• 1 Boss
• 2 Claws
4) Remove the Cable Cover.
• 1 Claw
F-4-152
x2
Boss
Claw
Claw
4-82
F-4-153
F-4-154
4-82