Login Service - Canon imageRUNNER ADVANCE C2030 Service Manual

2
Process/Operation > MEAP > Login Service > About Login Service
3) Click [Uninstall] button for the application to be uninstalled.
4) Check the application name to be uninstalled shown on the screen to click [Yes] button.
Upon [Yes] button clicked, uninstallation process is started.
2 Process/Operation > MEAP > Login Service > About Login Service

Login Service

■ About Login Service
The login service is started up to authenticate the user when MEAP-enabled device is booted
up. Login service changes and install/ uninstall are carried out from the 'System Management'
page. The pre-install applications and those provided on the accessory CD are as follows.
Default Authentication is used as the default at the time of shipment from the factory.
CAUTION:
• When the login service is set to SSO-H, Department ID management needs to be
[OFF] before changes can be made. To use SSO-H local device authentication and
Department ID management at the same time, after allocation of the department ID
to the Administrator, switch the authentication method to local device authentication
and then turn Department ID management ON.
• To use Department ID management in domain authentication, the option image-
WARE accounting manager is required.
F-2-202
• When the setting is SSO-H, the card reader for the option controller card cannot be
used.
• When using SSO-H, the clock settings of the server managing the Active Directory
and the MEAP device (and the PC used to log in), must be matched. If there is a
time difference of greater than five minutes in the clock settings, an error will be
generated when login is attempted.
• When the setting is SSO-H, start up takes a little longer when compared to Default
Authentication (because of the time required for object initialization).
• To use the SEND function when the setting is for SSO-H, when sending email, mail
addresses need to be programmed against each user. If they are not, email cannot
be sent. Note, however, that when sending i-Fax, the mail addresses set in the
device are used.
• This device does not support SDL, conventional SSO and Security Agent. In addition
F-2-203
these are not packaged in Administrator's CD.
2-138
2-138