Pickup And Feeding System; Pickup Unit; Before Removing The Pickup Unit; Removing The Pickup Unit - Canon LBP3250 Series Service Manual

Chapter 3
[3]

3.4 PICKUP AND FEEDING SYSTEM

3.4.1 Pickup Unit

3.4.1.1 Before Removing the Pickup Unit

1) Remove the upper cover. (page 3-2)Reference[Removing the Upper
Cover]
2) Remove the left cover. (page 3-1)Reference[Removing the Left Cover]
3) Remove the right cover. (page 3-1)Reference[Removing the Right Cov-
er]
4) Remove the rear cover. (page 3-1)Reference[Removing the Rear Cover]
5) Remove the main controller PCB. (page 3-8)Reference[Removing the
Main Controller PCB]
6) Remove the separation pad. (page 3-16)Reference[Removing the Sepa-
ration Pad]

3.4.1.2 Removing the Pickup Unit

1) Remove the rear inner cover [1].
- 1 screw [2]
- 2 claws [3]
[2]
2) Remove the shaft retainer [1].
3-14
[2] [1]
[1]
[3]
F-3-48
[1]
3) Remove the terminal [1] and free the harness [3] from the harness guide
0019-8386
[2].
0019-8389
4) Disconnect the 4 connectors [1].
5) Free the harness [3] from the harness guide [2].
6) Remove the pickup unit [1].
- 6 screws [2]
- 2 hooks [3]
[1]
F-3-49
[3] [2]
[1]
F-3-50
[2]
[1]
F-3-51
[3]
[1]