Parts Replacement Procedure; Cassette Pickup Roller; Removing The Cassette Pickup Roller; Cassette Separation Roller - Canon MF6500 Series Service Manual

Chapter 7

7.6 Parts Replacement Procedure

7.6.1 Cassette Pickup Roller

7.6.1.1 Removing the Cassette Pickup Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the cassette.
2) Place the machine with the rear panel down. However, since the exhaust
duct projects about 16 mm from other area of the rear panel, insert stacks
of paper or the like under the rear panel so that the machine stands stably.
3) Turn the pickup roller a half-turn with one hand, release the hook [1] with
the other hand, and remove the cassette pickup roller [2].
[1]

7.6.2 Cassette Separation Roller

7.6.2.1 Removing the Cassette Separation Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the cassette.
2) Place the machine with the rear panel down. However, since the exhaust
duct projects about 16 mm from other area of the rear panel, insert stacks
of paper or the like under the rear panel so that the machine stands stably.
3) Remove the feed roller.
4) Remove the claw [1], and pull out the separation roller assembly [2].
5) Remove the shaft [3] from the shaft hole to remove the separation roller
assembly [4].
7-6
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
F-7-6
[2]
F-7-7
0011-5297
6) Remove the shaft [1], and remove the separation roller [2].

7.6.3 Cassette Paper Sensor

7.6.3.1 Removing the Cassette Paper Sensor

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the two shafts [1], and then remove the transfer guide [2].
0012-7412
[1] [2]
[3]
[4]
F-7-8
[2]
[1]
F-7-9
0011-5385