Table of Contents
Advertisement
The following table describes the labels in this screen.
Table 36:
The Security: Service Filter Add/Edit Screen
Application Name
Protocol
Port Range
Rule Status
98
98
Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
Enter a name for the application for which you want to
create the rule.
NOTE:
This name is arbitrary, and does not affect
functionality in any way.
Use this field to specify whether the CGNV should filter
via:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
NOTE:
If in doubt, leave this field at its default (TCP).
Use these fields to specify the start and end port for
which this filtering rule applies. These are the ports to
which traffic will be blocked.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
Hitron CGNV User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY
Advertisement
Table of Contents
