Figure 23: The Basic: Port Triggering Add/Edit Screen; Table 21: The Basic: Port Triggering Add/Edit Screen - Hitron CGNV User Manual

Figure 23: The Basic: Port Triggering Add/Edit Screen
The following table describes the labels in this screen.
Table 21: The Basic: Port Triggering Add/Edit Screen
Application Name
Trigger Port Range
Target Port Range
64 64 Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
Enter a name for the application for which you want to
create the rule.
NOTE: This name is arbitrary, and does not affect
functionality in any way.
Use these fields to specify the trigger ports. When the
CGNV detects activity on any of these ports originating
from a computer on the LAN, it automatically opens the
Target ports in expectation of incoming traffic.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Use these fields to specify the target ports. The CGNV
opens these ports in expectation of incoming traffic
whenever it detects activity on any of the Trigger ports.
The incoming traffic is forwarded to these ports on the
computer connected to the LAN.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Hitron CGNV User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
BASIC