The Docsis Event Screen - Hitron CGNV User Manual

Table 12: The Status: DOCSIS WAN Screen (continued)
Upstream Overview
NOTE: The upstream signal is the signal transmitted from the CGNV.
Port ID
Frequency (MHz)
Modulation
Signal Strength
(dBmV)
Signal Noise Ratio
(dB)
Channel ID
3.5

The DOCSIS Event Screen

Use this screen to view information about the CGNV's wireless network.
Click Status > DOCSIS Event. The following screen displays.
45 45 Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
This displays the ID number of the upstream
connection's port.
This displays the actual frequency in Megahertz (MHz)
of each upstream data channel to which the CGNV is
connected.
This displays the type of modulation that each upstream
channel uses.
This displays the power of the signal of each upstream
data channel to which the CGNV is connected, in dBmV
(decibels above/below 1 millivolt).
This displays the Signal to Noise Ratio (SNR) of each
upstream data channel to which the CGNV is
connected, in dB (decibels).
This displays the ID number of each channel on which
the upstream signal is transmitted.
Hitron CGNV User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
STATUS