Figure 27: The Wireless: Security Settings Screen - Hitron CGNV User Manual

Figure 27: The Wireless: Security Settings Screen
The following table describes the labels in this screen.
Table 25: The Wireless: Security Settings Screen
WPS Settings
WPS Method
WPS Status
WPS Configure
Status
75 75 Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
Use these buttons to run Wifi Protected Setup (WPS):
Click the PBC button and then Push Button to begin
the Push-Button Configuration process. You must
then press the PBC button on your client wireless
devices within two minutes in order to register them
on your wireless network.
Click the PIN button to begin the PIN configuration
process. In the screen that displays, enter the WPS
PIN that you want to use for the CGNV, or the WPS
PIN of the client device you want to add to the
network.
This displays whether or not the CGNV is using Wifi
Protected Setup.
This displays the Wifi Protected Setup configuration for
the wireless network.
Hitron CGNV User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
WIRELESS