The Device Reset Screen - Hitron CGNV User Manual

Table 32: The Admin: Time Setting Screen (continued)
SNTP Function
Time Zone
Assign SNTP Server
Daylight Function
Daylight Time
Save Changes
Cancel
Help
6.7

The Device Reset Screen

Use this screen to back up your CGNV's settings to your computer, to load settings
from a backup you created earlier, to reboot your CGNV, or to return it to its factory
default settings.
Click Admin > Device Reset. The following screen displays.
89 89 Version 4.2.7.2, 05/2014. Copyright
Version 4.2.7.2, 05/2014. Copyright
Use this field to select whether the SNTP Function be
active or not.
Select Enabled to activate the SNTP Function.
Select Disabled to deactivate the SNTP Function.
NOTE: The Simple Network Time Protocol (SNTP) is an
adaptation of the Network Time Protocol (NTP)
used to synchronize computer clocks in the
Internet.
Use this fields to select the time zome when the SNTP
Function enabled.
Enter the SNTP Server you want to assign manually.
Use this field to select whether the Daylight Function be
active or not.
Select Enabled to activate the Daylight Function.
Select Disabled to deactivate the Daylight Function.
Enter the duration of the daylight time.
Click this to save your changes to the fields in this screen.
Cancel Click this
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this screen.
Hitron CGNV User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
ADMIN