Advertisement
your password. The maximum size of the password is 8 characters. System will prompt you to
reenter the password to verify. Remember the passwords are case sensitive.
If you want to remove the passwords, either delete passwords or press <Enter> when prompting for
new password.
If you want it to require password upon initial system startup and upon entering the CMOS Setup
Utility, you will need to change the selection of the (Security Option) under (BIOS FEATURES
SETUP) to "System".
If the setting is "Setup", the system will only require the password you activate CMOS Setup Utility.
3.11 IDE HDD Auto Detection
If your system has an IDE hard drive, you can use this function to detect its parameters and enter
them into the "Standard CMOS Setup" automatically.
This routine only detects one set of parameters. If your hard disk is formatted using different
parameters than those detected, you have to enter the parameters manually. If the parameters listed
do not match the ones used to format the disk, the information on that disk will not be accessible. If
the auto-detected parameters displayed do not match those that are used for your drive, ignore
them. Type N to reject the values and enter the correct ones manually from the Standard CMOS
Setup screen.
3.12 Exit CMOS Setup Utility
Press the <F10> key to save the setup and exit. Press <ESC> key to exit without saving. Either
saving or not saving modifications, screen will prompt user to confirm, and system will reboot on
exit.
Chapter 4. Sound Driver Installation
(The Sound function is optional. If you have sound on board, you can follow the below steps to load
sound driver)
4.1 Windows 95 Installation
1.
Start up Windows 95 OSR2.1 or later version
[ If your Windows 95 is older version, please install the USB supplement service pack ( usbsupp.exe ) files
first. You can get this file from Microsoft Inc. (
2.
Remove the " ?PCI Multimedia Audio Devices " item from Start \Settings \Control Panel \System \Device
Manager \?Other devices.
3.
Insert the CD Driver into the CD drive - enter the \P2370A-V\SOUND\WIN9X directory on the CD-ROM and
double-click SETUP.EXE
4.
Choose the " Upgrade Drivers " option then click " Next " button.
5.
Follow the prompts to complete the installation.
6.
Restart your system.
7.
The New Hardware Found Wizard will detect " PCI Multimedia Audio Device ". Click the " Next " button and
select " Other Locations..." button. Type in
the CD ROM is Ddrive)
8.
Windows found the following updated driver for this device:ESS SOLO-1 PCI AudioDrive. Click " Finish "
button.
9.
When the Insert Disk dialog is displayed, please insert the " Windows 95 CD-ROM " into the CD drive, then
click " OK " button. Type in " D:\WIN95 ", then click " OK " button.
10.
.Follow the prompts to complete the installation.
4.2 Windows 98 Installation
http://www.microsoft.com
D:\P2370A-V\SOUND\WIN9X
). ]
and clcik " OK " button. (Assume
Advertisement
