Advertisement
Chapter 2. Hardware Setup
2.1 Installation Procedure
2.1.1 Jumper Settings
2.1.2 Enable/Disable Sound
2.1.3 Clearing the CMOS
2.1.4 CPU Voltage Setting
2.1.5 CPU Frequency Selection
2.1.6 CPU FSB Frequency Setting
2.2 Installation of CPU
2.2.1 For Celeron, Pentium II & III CPU
2.2.2 For Socket 370 CPU
2.3 Installation of Memory
2.3.1 Installation of 168-pin DIMM
2.3.2 Removal of 168-pin DIMM
2.3.3 Memory Configuration
2.4 I/O Connections/Panel Connections
2.4.1 ATX Power Connector
2.4.2 CPU Fan Connector
2.4.3 Infrared Connector
2.4.4 Wake-up on LAN Connector
2.4.5 Creative's SB_LINK Sound Connector
2.4.6 Floppy Disk Drive Connector
2.4.7 Primary/Secondary IDE Connector
2.4.8 PS/2 Mouse Port
2.4.9 PS/2 Keyboard Connector
2.4.10 Serial Port
2.4.11 Printer Port
2.4.12 USB Connectors
2.4.13 Line Out Connector (optional)
2.4.14 Line In Connector (optional)
2.4.15 Microphone In Connector (optional)
2.4.16 Game/MIDI Port (optional)
2.4.17 ATAPI IDE/SONY Audio (optional)
2.4.18 Mitsumi Audio (optional)
2.4.19 Panel Connection
Chapter 3. BIOS Setup
3.1 CMOS Setup Utility
3.2 Standard CMOS Setup
3.3 BIOS Features Setup
3.4 Chipset Features Setup
3.5 Power Management Setup
3.6 PNP/PCI Configuration Setup
3.7 Integrated Peripherals
3.8 Load BIOS Defaults
3.9 Load Setup Defaults
3.10 Supervisor/User Password
3.11 IDE HDD Auto Detection
3.12 Exit CMOS Setup Utility
Chapter 4. Sound Driver Installation
4.1 Windows 95 Installation
4.2 Windows 98 Installation
Advertisement
