Advertisement
2.4.5 Creative's SB_LINK Sound Connector (6-pin SB_LINK)
The SB_LINK serves as a bridge between the mainboard and Creative's PCI sound card. This
connector delivers Sound Blaster 16 compatibility for real-mode DOS games.
2.4.6 Floppy Disk Drive Connector (34-pin JFLP1)
This connector supports the provided floppy disk drive ribbon cable. Orient the red stripe to pin 1
2.4.7 Primary/Secondary IDE Connector (Two 40-pin IDE)
These connectors support the provided IDE hard disk ribbon cable. Connect your first IDE hard disk
to master mode of the primary channel. If you have second IDE device to install in your system,
connect it as slave mode on the same channel, and the third and fourth device can be connected on
secondary channel as master and slave mode respectively.
Advertisement
