Advertisement
1.
Start up Windows 98.
2.
Open " My Computer ", and select " Control Panel " icon.
3.
Select " System " icon, and then select " Device Manager " page.
4.
Please remove " ?PCI Multimedia Audio Device " from " ?Other devices " under device list with the "
Remove " button.
5.
Please double click on the Add New Hardware icon then click " Next " button, click " Next " one more
times.
6.
This Wizard searches for new drivers for " PCI Multimedia Audio Device ", you have to attempt to locate a
driver provided by the manufacturer.
7.
Please insert the CD Driver into the CD drive, then click " Next " button.
8.
" What do you want Windows to do? ", Please click " search for the best driver for your device
[Recommended] ", then click " Next " button.
9.
Please click " Specify a location ", then type in"D:\P2370A-V\SOUND\WIN9X ", then click " Next " button.
Click " Next " one more times.
Note: D: is the Drive where CD Driver has been inserted.
10.
. Click the " Finish " button.
11.
. When Insert Disk dialog is displayed, please insert the " Windows 98 CD- ROM " into the CD drive, then
click " OK " button.
12.
. Windows found and installed Sound devices then click " Next " button.
13.
. Click " Finish " button.
4.3 Windows NT 4.0 Installation
1.
Login Windows NT 4.0
2.
Insert the CD Driver into the CD drive - enter the \P2370A-V\SOUND\NT40 directory on the CD-ROM and
double-click SETUP.EXE
3.
Follow the prompts to complete the installation.
4.
Restart your system.
4.1 Windows 95 Installation
1. Start up Windows 95 OSR2.1 or later version
[ If your Windows 95 is older version, please install the USB supplement service pack ( usbsupp.exe ) and
winp2x4.exe files first. Please refer to the readme.txt file that in CD Driver \P2370A or \P2370A-Z directory. ]
2. The Windows 95 Update Device Driver Wizard will detect the sound device and show " PCI Multimedia
Audio Device ", you have to attempt to locate a driver provided by the manufacturer.
3. Please insert the CD Driver into the CD drive, then click " Next " button.
4. Click " Other Locations... " button.
5. Type in "D:\P2370A\SOUND\WIN95" or " D:\P2370A-Z\SOUND\WIN95 ", then click " OK " button. The path
depends on the product name of the motherboard.
Note: D: is the Drive where CD Driver has been inserted.
6. When the correct location is displayed in the Update Device Driver Wizard
dialog click " Finish " button.
7. When the Insert Disk dialog is displayed click " OK " button.
8. Type in " D:\P2370A\SOUND\WIN95 "or " D:\P2370A-Z\SOUND\WIN95 ", then click " OK " button. The path
depends on the product name of the motherboard.
Note: D: is the Drive where CD Driver has been inserted.
9. Please insert the " Windows 95 CD-ROM " into the CD drive, then click " OK " button. Type in " D:\WIN95 ",
then click " OK " button.
4.2 Windows 98 Installation
Advertisement
