Advertisement
2.4.2 CPU Fan Connector (3-pin PFAN1)
Connect the fan's plug to the board taking into consideration the polarity of the connector.
2.4.3 Infrared Connector (5-pin SIR)
This connector supports the optional wireless transmitting and receiving infrared module, with this
module and application software such as Laplink or Win95 Direct Cable Connection, user can
transfer files to or from their laptops, notebooks, PDA, PCs and printers. The connector supports
IrDA (115.2Kbps, 2 meters) and ASK-IR (56Kbps). Install infrared module onto Infrared connector
and configure the setting through "UART Mode Select" in Integrated Peripherals to select whether
UART is directed for use with COM2 or Infrared.
2.4.4 Wake-up on LAN Connector (3-pin JP1)
The JP1 connector powers up the system when a wakeup packet or signal is received from the
network . This feature requires the Wake up on LAN function in BIOS is set to Enabled and that your
system has an ATX power supply with at least 720mA +5V standby power.
Advertisement
