Advertisement
1.
Before inserting the DIMM, make sure the pin1 of the DIMM matches with the pin1 on the DIMM socket.
2.
Insert DIMM into the DIMM sockets at a 90-degree angle and press down.
2.3.2 Removal of 168-pin DIMM
1.
Press the holding clips on both sides of the socket outward to release the DIMM.
2.
Gently pull the DIMM out of the socket.
3.
2.3.3 Memory Configuration
There is no jumper setting required for the memory size or type. It is automatically detected by the
system BIOS, and the total memory size is to add them together.
DIMM Socket
DIMM1
DIMM2
DIMM3
Notice: The P2/370A-Z motherboard supports DIMM1 & DIMM2 socket only.
2.4 I/O Connections/Panel Connections
I/O Connections
J1
PFAN1
SIR
JP1
SB_LINK
JFLP1
IDE1, 2
MS
KB
JCOM1, 2
JPRT
USB1, 2
P1
LOUT
LIN
MIC
MITSUMI
SONY
2.4.1 ATX Power Connector (20-pin J1)
Make sure that the power supply is off before connecting or disconnecting the power cable.
DIMM Modules
EDO/SDRAM 8, 16, 32, 64, 128, 256MB
EDO/SDRAM 8, 16, 32, 64, 128, 256MB
EDO/SDRAM 8, 16, 32, 64, 128, 256MB
ATX Power Connector
CPU fan connector
Infrared Connector ( Cable optional )
Wake up on LAN connector
For link with Creative's Sound Blaster 16
Floppy Disk Drive Connector
Primary/ Secondary IDE Connectors
PS/2 Mouse Port
PS/2 Keyboard Connector
Serial Ports 1 & 2
Printer Port
USB Connector
Game/MIDI Connectors (optional)
Line out Connector (optional)
Line in Connector (optional)
Microphone in Connector (optional)
The Connector for Mitsumi CD-ROM audio cable (optional)
The Connector for IDE/Sony CD-ROM audio cable (optional)
Advertisement
