Table of Contents
Advertisement
Introduction
Robot Assembly
The robot assembly transports sample tubes to and from the interface gate
and moves sample tubes or cassettes within the Centrifuge module.
Figure 6:
1. Z-brake release
2. Gripper
3. Gripper release
The robot performs the following actions:
•
Picks cassettes from the cassette buffer area during system startup.
•
Makes non-contact survey using a laser at the scale to verify the
presence of tubes and cassettes.
•
In the buffer area and Hettich unit, the gripper makes contact survey to
verify that cassettes are present.
page 12
Centrifuge Module Interface Operating Instructions
Robot Assembly
092D0001-02 Rev. A
Advertisement
Table of Contents
