Operating Instructions; To Turn Off Gas To Appliance - Vermont Castings VWDVP70NTSC Installation And Operating Instructions Manual

VWDV70 Series Gas Fireplace
1. STOP! Read the safety information above.
2. This appliance is equipped with an ignition device which automatically lights the burner. Do not try
to light the burner by hand.
3. Wait fi ve (5) minutes to clear out any gas. Then smell for gas, including near the fl oor. If you smell
gas, STOP! Follow "B" in the safety information on Page 31. If you do not smell gas, go to next
step.
4. Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This
indicates the system is ready.
5. Press "ON " button. Sparker will spark and pilot fl ame will light.
6. Once pilot fl ame is established, the main burner fl ame will light automatically.
7. If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service
technician or gas supplier.
OFF
1. Turn master switch to "OFF".
2. Turn off all electrical power to the appliance if service is to be performed.
36
SIGNATURE COMMAND SYSTEM OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

OFF
ON
Command Center

TO TURN OFF GAS TO APPLIANCE

Master
Switch
ON
20306745