Safety Barrier Installation Instructions - Vermont Castings VWDVP70NTSC Installation And Operating Instructions Manual

Direct vent gas fireplace
Table of Contents

Advertisement

VWDV70 Series Gas Fireplace
S
AFETY
SAFETY BARRIER INSTALLATION
INSTRUCTIONS
NOTE: A barrier designed to reduce the risk of burns
from the hot viewing glass is provided with this
appliance and shall be installed for the protection of
children and other at risk individuals. If the barrier
becomes damaged, the barrier shall be replaced with
the manufacturer's barrier for this appliance.* Any
safety screen, guard, or barrier removed for servicing
the appliance must be replaced prior to operating the
appliance.
* See parts list for model number.
1. Remove screen from packaging.
2. Align the four tabs on the sides of the screen frame
(two top, two bottom) Figure 57 with the correspond-
ing slots on the fi rebox. Figure 58.
3. Slide the screen down into the slots until it fi ts
securely in place.
NOTICE: It is the responsibility of the installer to ensure
the barrier is affi xed to the fi replace at the time of instal-
lation.
Figure 57
34
CERTIFIED
B
ARRIER
Tabs
(two per side)
DANGER
A barrier designed to reduce the risk of burns from the hot
viewing glass is provided with this appliance and shall
be installed for the protection of children and
other at risk individuals.
WARNING: The safety screen barrier
must be installed after the glass front is
in place. It is NOT a replacement for the
glass and the unit must NOT be oper-
ated without the glass in place.
Slots (Qty: 4.
Two per side)
Figure 58
FINAL INSTALLATION
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
Slot
20306745
20306543

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vwdv70ntscsb

Table of Contents