Deleting A Memory Channel - Icom IC-V3500 Advanced Manual

MEMORY OPERATION
3�

Deleting a Memory channel

You can delete Memory channel contents.
NOTE: The deleted Memory channel contents
cannot be recalled�
1� Push [V/MHz SCAN] to select the VFO mode.
2� Push [S.MW MW] to enter the Memory Write
mode�
• " " and the Memory channel number blink�
3� Rotate [DIAL] to select the Memory channel.
L Memory channels not set are blank�
4� Push [S.MW MW], and then sequentially hold
down [S.MW MW] for 1 second to delete the
contents�
NOTE: This operation must be performed within
1.5 seconds.
• Three beeps sound, and then the selected Memory
channel contents are deleted�
L When the Call channel is deleted, the current VFO
contents are automatically reassigned to the Call
channel�
5. Push any key other than [S.MW MW] to return to
the VFO mode.
Using the HM-133V microphone
1� Push [VFO/LOCK] to select the VFO mode.
2� Push [FUNC], and then push [CLR A MW] to enter
the Memory Write mode�
3� Push [▲] or [▼] to select the Memory channel.
• " " and the Memory channel number blink�
L Memory channels not set are blank�
4� Push [FUNC] then [CLR A MW], and then push
[FUNC] then hold down [CLR A MW] for 1 second
to delete the contents�
NOTE: This operation must be performed within
1.5 seconds.
• Three beeps sound, and then the selected Memory
channel contents are deleted�
L When the Call channel is deleted, the current VFO
contents are automatically reassigned to the Call
channel�
5. Push [CLR A MW] to return to the VFO mode.
Example: Deleting Memory channel 20.
Push [V/MHz SCAN] to select the VFO mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push [S.MW MW] to enter the Memory Write mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Rotate [DIAL] to select Memory channel 20.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push [S.MW MW], and then sequentially hold down
[S.MW MW] for 1 second to delete the contents.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push any key other than [S.MW MW] to return to the
VFO mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Example: Deleting Memory channel 20.
Push to select the VFO mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push
, and then
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push
or to select Memory channel 20�
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET LOW TONE
MONI
Push
then
for 1 second within 1.5 seconds to delete the contents.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Push to return to the VFO mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
3-10
PRIO SCAN
M/CALL V/MHz
" " and the Memory Channel
number blink�
PRIO SCAN
M/CALL V/MHz
PRIO SCAN
M/CALL V/MHz
PRIO SCAN
M/CALL V/MHz
PRIO SCAN
M/CALL V/ MHz
PRIO SCAN
M/CALL V/MHz
to enter the Memory Write mode�
" " and the Memory Channel
number blink�
PRIO SCAN
M/CALL V/MHz
PRIO SCAN
M/CALL V/MHz
, and push then hold down
PRIO SCAN
M/CALL V/MHz
PRIO SCAN
M/CALL V/ MHz