Icom IC-V3500 Advanced Manual page 49

PRIORITY WATCH
5.
VFO frequency and a Memory Bank scan
DBank Link scan
Searches the Memory channels in the linked banks
every 5 seconds while receiving on a VFO frequency
NOTE: To use a Bank Link scan, the Bank Link
function must be turned ON and two or more Banks
are linked in the Set mode (p 8-4)
1 Set the receive frequency
2 Repeatedly push [M/CALL PRIO] to select the
Memory mode
• " " and the Memory Channel number are displayed
3 Push [BANK OPT] to select the Memory Bank
mode
• " " and the bank letter blink
L The bank name is displayed, if set
4 Rotate [DIAL] to select any bank
L Banks that contain no Memory channels are skipped
5 Push any key to exit the Memory Bank mode
• " " and the bank letter are displayed
6 Hold down [V/MHz SCAN] for 1 second to start
scanning
• The frequency decimal point and "
7 Hold down [M/CALL PRIO] for 1 second to start
the Priority watch
• "PRIO" is displayed
8 Push [M/CALL PRIO] to cancel the watch
• "PRIO" disappears
TIP: When a signal is received
• "PRIO" blinks
• The Memory channel is automatically selected
L The Scan Pause timer and Scan Resume timer settings
are the same as those for a normal scan (p 8-3)
"PRIO" blinks
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
" blink
PRIO DIGITAL AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz
5 seconds 125 milliseconds
Skip
VFO
frequency
Example: Watching a Bank Link scan while
receiving in the VFO mode.
Set the receive frequency
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Repeatedly push [M/CALL PRIO] to select the
Memory mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push [BANK OPT] to enter the Memory Bank mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Rotate [DIAL] to select any bank (Example: Bank A)
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
Push any key to exit the Memory Bank mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Hold down [V/MHz SCAN] for 1 second to start
scanning
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Hold down [M/CALL PRIO] for 1 second to start the
Priority watch
PRIO DIGITAL
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
"PRIO" is displayed
The Priority watch searches for a signal on the
Memory channels in the linked banks every 5
seconds
5-7
Bank A
BANK J
M1
M2
BANK D
M3
BANK C
M5 BANK B
PRIO SCAN
V/ MHz
" " and the Memory Channel
number are displayed
PRIO SCAN
V/ MHz
" " and the bank letter are
displayed
PRIO SCAN
V/ MHz
"" and " " blink
PRIO SCAN
V/ MHz
AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP
PRIO SCAN
S ET
V/ MHz MONI LOW
Skip
PRIO DIGITAL AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz