Icom IC-V3500 Advanced Manual page 85

11 INSTALL AND CONNECTIONS
Fuse replacement
A fuse is installed in each fuse holder of the supplied
DC power cable If a fuse blows or the transceiver
stops functioning, find and repair the cause of the
problem Then replace the damaged fuse with a new,
adequately rated fuse (FGB 15 A)
R WARNING!
• NEVER remove the fuse holders from the DC
power cable USE only the applicable fuses
• NEVER replace the fuse when the DC cable is
connected to the power source
Fuse Coding explanation
Fuse Coding: FUSE 125 V 15 A
Fuse Voltage Rating: 125 Volts
Fuse Current Rating: 15 Amperes
11-5