Icom IC-V3500 Advanced Manual page 45

PRIORITY WATCH
5.
VFO frequency and a Memory/Call channel
Searches the selected Memory or Call channel every
5 seconds while receiving on a VFO frequency
1 Set the receive frequency
2 Set the Priority channel
To select a Memory channel
Repeatedly push [M/CALL PRIO] to select the
Memory mode, and then rotate [DIAL] to select the
Memory channel
To select a Call channel
Repeatedly push [M/CALL PRIO] to select the Call
channel
3 Hold down [M/CALL PRIO] for 1 second to start
the Priority watch
• "PRIO" is displayed
4 Push [M/CALL PRIO] to cancel the watch
• "PRIO" disappears
TIP: When a signal is received
• "PRIO" blinks
• The Memory or Call channel is automatically
selected
L The Scan Pause timer and Scan Resume timer settings
are the same as those for a normal scan (p 8-3)
"PRIO" blinks
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
Using the HM-133V microphone
1 Set the receive frequency
2 Set the Priority channel
To select a Memory channel
Repeatedly push [MR/CALL] to select the Memory
mode, and then push [▲] or [▼] to select the
Memory channel
To select a Call channel
Hold down [MR/CALL] for 1 second to select the
Call channel
3 Push [PRIO 3 PTT-M] to start the Priority watch
• "PRIO" is displayed
4 Push [PRIO 3 PTT-M] to cancel the watch
• "PRIO" disappears
PRIO DIGITAL AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz
5 seconds
milliseconds
VFO Memory
frequency channel
Example: Watching Memory channel 20 while
receiving in the VFO mode.
Set the receive frequency
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET LOW TONE M/CALL
MONI
Repeatedly push [M/CALL PRIO] to select the
Memory mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Rotate [DIAL] to select Memory channel 20
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Hold down [M/CALL PRIO] for 1 second to start the
Priority watch
PRIO DIGITAL
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
"PRIO" is displayed
The Priority watch searches for a signal on Memory
channel 20 every 5 seconds
Set the receive frequency
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push to select the Memory mode
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push or to select Memory channel 20
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
Push to start the Priority watch
PRIO DIGITAL
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE M/CALL
"PRIO" is displayed
The Priority watch searches a signal on Memory
channel 20 every 5 seconds
5-3
5 seconds
125
VFO
frequency
PRIO SCAN
V/MHz
" " and the Memory Channel
number are displayed
PRIO SCAN
V/MHz
PRIO SCAN
V/MHz
AO BUSY
MUTE
NAR
MID
LOW
PRIO LOCK ANM DUP
SCAN
S ET MONI LOW
V/ MHz
PRIO SCAN
V/MHz
" " and the Memory Channel
number are displayed
PRIO SCAN
V/MHz
PRIO SCAN
V/ MHz
AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP
PRIO SCAN
S ET MONI LOW
V/ MHz
125
milliseconds
Call
channel
PRIO DIGITAL AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz
PRIO DIGITAL AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz