Toro Z Master 75990 Operator's Manual page 6

Using the Rollover-Protection
System (ROPS)
•
The ROPS is an integral safety device. Keep the
ROPS in the raised and locked position and use
the seat belt when operating the machine.
•
Lower the ROPS temporarily only when absolutely
necessary. Do not wear the seat belt when the
ROPS is folded down.
•
Be aware there is no rollover protection when the
ROPS is in the down position.
•
Be certain that the seat belt can be released
quickly in the event of an emergency.
•
Check the area to be mowed and never fold
down the ROPS in areas where there are slopes,
drop-offs, or water.
•
Check carefully for overhead clearances (e.g.,
branches, doorways, or electrical wires) before
driving under any objects and do not contact them.
•
Keep the ROPS in safe operating condition by
periodically thoroughly inspecting for damage and
keeping all mounting fasteners tight.
•
Replace a damaged ROPS. Do not repair or
revise.
•
Do not remove the ROPS.
•
Any alterations to a ROPS must be approved by
the manufacturer.
•
Do not mow slopes greater than 15 degrees.
Service
•
Do not store the machine or a fuel container inside
where there is an open flame, such as near a
water heater or furnace.
•
Keep the nuts and bolts tight, especially the
blade-attachment bolts.
•
Never interfere with the intended function of a
safety device or reduce the protection provided
by a safety device. Check their proper operation
regularly.
•
To best protect your investment and maintain
optimal performance of your Toro equipment, count
on Toro genuine parts. When it comes to reliability,
Toro delivers replacement parts designed to the
exact engineering specifications of our equipment.
For peace of mind, insist on Toro genuine parts.
•
Check brake operation frequently. Adjust and
service as required.
6