Toro Z Master 75990 Operator's Manual page 55

1. Clutch pulley
2. Mower belt
3. Spring-loaded idler pulley
4. Ratchet
10. Install the belt guide on the idler arm shown in
Figure 78.
11. Using the ratchet in the square hole, install the
idler spring (Figure
Make sure that the spring ends are seated in
the anchor grooves.
12. Install the belt covers
Figure 78
5. Square hole in the idler
arm for the ratchet
6. Idler grease fitting
7. Belt guide
78).
(Figure 79).
1. Position the belt cover.
2. Slide the belt cover under
the side catches.
g009038
55
Figure 79
3. Ensure that the tab is
under the metal catch.
g027730