Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
5.6
5.6.1
Operating Instructions Web512 V2.6.x for Web-server II 1598
Users
Even if the Web-server II is to be used for status information only
(User level 1), it is recommended to have a User name and Password
(i.e. "Anonymous login" is not allowed, see below).
For remote control and access to corresponding information, a User
name and a Password are always required for User level 2 (Daily),
User level 3 (Maintenance) and User level 4 (Service).
User settings
User name and a Password for User level 0 (Select this level to
temporary ignore this user, i.e. a user with this user level cannot log in
to the web page.)
User name and a Password for User level 1 (Status information
only.)
User name and a Password for User level 2 (Daily)
User name and a Password for User level 3 (Maintenance)
User name and a Password for User level 4 (Service)
The following password policy has to be followed:
Minimum length: 6 characters
At least one upper case letter
At least one lower case letter
At least one digit
The following characters can be used: A-Z a-z 0-9
Depending on if Anonymous login is allowed or not, User name and
Password are not required or required to see the status information
(User level 1).
When User lockout is selected, any user will be locked out for one
hour, after entering a wrong password three times.
When User override is selected, a user with a higher user level than
an already logged in user, can login and automatically log out the user
with the lower user level.
53
Advertisement
Table of Contents
