Table of Contents
Advertisement
Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
5.3.2.1.5
5.3.2.1.6
5.3.2.1.7
Operating Instructions Web512 V2.6.x for Web-server II 1598
{7}
The technical number for the dirty detector (000001-293127)
(BS4 unit: 004001-297399.
{8}
Date & time, i.e. MM-DD hh:mm:ss (month-day hour :
minute : second), e.g. 11-24 12:34:56
Prewarning
Pre-warning e-mail.
Receiver(s), Subject and Body text shall be typed.
The following parameters can be used in the "Body" text:
{1}
The custom text string that contains data about the system,
according to chapter "Text", page 45.
{2}
The alarm point's presentation number, i.e. ZONE–ADDRESS
(e.g. 001-01).
{3}
The user definable text message (alarm text), shown in the fire
alarm system, for the alarm point.
{6}
The actual EBL512 c.i.e. number, i.e. the c.i.e. to which the
alarm point is connected (00-29).
{8}
Date & time, i.e. MM-DD hh:mm:ss (month-day hour :
minute : second), e.g. 11-24 12:34:56
Test mode
Test mode alarm e-mail.
Receiver(s) and Subject shall be typed.
The "Body" text will be automatically created / listed during the test.
An e-mail will be sent when you click the Send mail button. See
chapter "Zones in Test", page 16.
Web log
Web log e-mail.
Receiver(s) and Subject shall be typed.
The "Body" text will be automatically created and an e-mail will be
sent when there are 100 events in the web log. When the email is sent
the web log will be automatically erased.
not used, the 100 events will be erased – without any warning.)
(Also if this email facility is
49
Advertisement
Table of Contents
