Alarm - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.4.1.1
4.4.1.2
4.4.1.3
4.4.1.4
4.4.1.5
4.4.2
Operating Instructions Web512 V2.6.x for Web-server II 1598
Sync. Status = Finished = The control unit info for the system
(system) have been picked up by the Web-server II.
System Info
Click System Info to open the Status – System Information view:
System Information, e.g. software version (2.6.4) and maximum
number of addresses that can be used (MAX LOOPS 512).
Click Control Unit to return the Status – Control Unit view.
Click Summary to return to the Status – Summary view.
Gateway Fault
Value = Normal = There is no Web-server II  external equipment
communication fault.
Value = Error = There is a Web-server II  external equipment
communication fault.
Last sent e-mail tag
Value = Date and time when the last e-mail was sent. (Also showing
if the communication Web-server II  SMTP server was OK at
that time.)
RS232 Fault
Value = Normal = There is no Web-server II  EBL512
communication (RS232) fault.
Value = Error = There is a Web-server II  EBL512
communication (RS232) fault.
Version
Web512 S/W version.

Alarm

In case of a fire alarm (Value > 0 and red indication), click Alarm or
to view the Alarm view / list.
List
13