Functions - Panasonic Web-server II Operating Instructions Manual

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4
Operating Instructions Web512 V2.6.x for Web-server II 1598

Functions

The following chapters describes all Web-server II functions.
The site's start page (before login) might look as follows:
NOTE! The look might vary depending on screen resolution, settings etc.
Up to the right: A predefined text string (custom text) with data about
the actual system, see chapter "Text", page 45.
Down to the right: An image (custom logo), see chapter "Logo", page
44.
A number of buttons (hyperlinks to other pages).
Depending on if "Anonymous login" is allowed or not, User name
and Password are required or not required, to see the status
information.
Even if the Web-server II is to be used for status information only
(User level 1), it is recommended to use User name and Password
(i.e. "Anonymous login" is not recommended).
For remote control and access to corresponding information, a User
name and a Password are always required for User level 2 (Daily),
User level 3 (Maintenance) and User level 4 (Service).
The Web-server II has to be configured via the PC tool Web512 II
Config Tool V2.6.x, see page 42.
User level 1 (Status information only.)
User level 2 (Daily)
User level 3 (Maintenance)
User level 4 (Service)
9