Panasonic Web-server II Operating Instructions Manual page 36

Panasonic Electric Works Nordic AB
MEW01228 Rev: 1
4.10.3.3
4.10.3.4
4.10.3.5
4.10.3.6
Operating Instructions Web512 V2.6.x for Web-server II 1598
Activate Alarm
Like menu H8/S9.
A specified alarm point (Zone-Address) can be set in fire alarm
mode. Reset the fire alarm like any other fire alarm, see chapter
Alarm, page 13.
Synchronize
Like menu H8/S10.
Click OK to start the synchronization.
Click Control Unit to open the Status – Control Unit view to see
the Sync. Status for the control unit respectively.
Click Misc to return to the Maintenance – Misc. view.
Click System Info to see System Information, e.g. software version
(2.6.4) and maximum number of addresses that can be used (MAX
LOOPS 512).
Click Control Unit to return to the Status – Control Unit view.
Click Summary to return to the Status – Summary view.
Silence Alarm Device
Like the "Silence alarm devices" button on the EBL512 front.
Click Start to silence the alarm devices.
Click End to end the silence function.
Evacuate
Like the "Evacuate" button on the EBL512 front.
Click Start to start the evacuate function.
Click End to end the evacuate function.
34