Panasonic FP7 Series User Manual page 67

Item
Conversion speed
Indication accuracy
Reference junction compensation
accuracy
Input impedance
Absolute max. input
Insulation method
Execution/Non-execution channel
settings
Input range selection
Digital processing
Comparison for Upper and Lower
Limits
Holding max./min. values
Disconnection detection
External connection method
WUME-FP7TCRTD-04
Specifications
K1: -100.0 to 600.0°C / K2: -200.0 to 1370.0°C
J1: -100.0 to 400.0°C / J2: -200.0 to 1200.0°C
T: -270.0 to 400.0°C
N: -270.0 to 1300.0°C
Thermocouple
R: 0.0 to 1760.0°C
(Resolution:
S: 0.0 to 1760.0°C
0.1°C)
B: 0.0 to 1820.0°C
E: -270.0 to 1000.0°C
PLII: 0.0 to 1390.0°C
WRe5-26: 0.0 to 2315.0°C
Processing time is added to the conversion time for the number of
execution channels.
High-speed mode: 5 ms/ch + 5 ms
Normal mode: 25 ms/ch + 25 ms
±0.1% F.S. or less (at 25°C in the normal mode)
(Note 4)
±0.3% F.S. or less (at 0 to +55°C)
±1.0°C (with thermocouple input)
Voltage input 1 MΩ
Current input 250 Ω
-15 to 15 V DC Voltage input
-2 to 30 mA Current input
Between input
terminals and Photocoupler Insulated DC/DC converter
internal circuit
Between
PhotoMOS relay
channels
Possible to make settings on a channel-by-channel basis
Possible to make settings on a channel-by-channel basis
Average
Number of averaging times, Time average, Moving average
processing
Scale conversion A desired value within the range of ±30,000 (Voltage/current range
setting only)
Offset setting A desired value within the range of ±3000
Gain setting ±10%
Possible to make settings on a channel-by-channel basis
Possible to make settings on a channel-by-channel basis
Available (Voltage range of 1 to 5 V, current range of 4 to 20 mA and
thermocouple range only)
Connection terminal block connection
8.1 Specifications
(Note 6)
(Note 6)
(Note 2)
(Note 3)
8-3