Panasonic FP7 Series User Manual page 31

Group Setting item
Range setting
(RTD unit)
Average Processing Settings
Offset/Gain processing
Scale conversion
Comparison for Upper and
Lower Limits
Max./Min. hold
Disconnection detection
Disconnection detection reset
Averaging constant
Option
Setting
Offset value
(for each
channel)
Gain value
Maximum value of scale
conversion
Minimum value of scale
conversion
Upper limit comparison ON
level
Upper limit comparison OFF
level
Lower limit comparison ON
level
Lower limit comparison OFF
level
(Note 1) Conversion time can be set only when selecting the thermocouple multi-analog input unit.
(Note 2) For the Thermocouple Multi-analog Input Unit of Ver. 1.0, the K2 range is -200.0 to 1000.0°C, and J2
range is -200.0 to 750.0°C.
(Note 3) Scale conversion can be set only when selecting voltage or current range in the thermocouple multi-
analog input unit.
WUME-FP7TCRTD-04
Settings
-100 to +100 mV
0 to +20 mA
Current
+4 to +20 mA
Pt100-1 (-100.0 to 200.0°C)
Pt100-2 (-200.0 to 650.0°C)
JPt100-1 (-100.0 to 200.0°C)
JPt100-2 (-200.0 to 650.0°C)
Pt1000 (-100.0 to 100.0°C)
Not execute/No. of averaging times/
Time average/Moving average
Not execute/Execute
(Note 3) Not execute/Execute
Not execute/Execute
Not execute/Execute
Not execute/Execute
Auto/Manual
No. of times: 2 to 60000 [times]
Time: 200 to 60000 [ms]
Moving: 3 to 64 [times]
-3000 to +3000
+9000 to +11000
-30000 to +30000
(Note 3)
-30000 to +30000
(Note 3)
-31250 to +31250
-31250 to +31250
-31250 to +31250
-31250 to +31250
4.2 Configuration Settings
Default
Pt100-1
(-100.0 to 200.0°C)
Not execute
Not execute
Not execute
Not execute
Not execute
Not execute
Auto
8
200
8
0
+10000
+10000
0
+1000
+1000
0
0
4-7