Service Manual
8.1.6 Evaporator
Remove the front panel, electrical parts and fan (refer to 9.1.1 Front
Panel, 9.1.2 Electrical Parts and 9.1.3 Fan Motor and Fan) before
disassembling evaporator.
1. Remove the 2 screws then remove thepanel frame assembly.
Figure 92
2. Disassemble the pipe clamp board.
Figure 93
7 6 |
Bosch Wall Mounted Ductless Split Air Conditioner / Heat Pump IDU-ODU - BTC 769102301 A (11.2022)
3. Remove the 1 screw on the evaporatorlocated at the left fi xed plate.
4. Remove the 1 screw on the evaporator located on the right side.
Figure 94
5. Bend the piping carefully, separate the chassis assembly(above) and the
evaporator then take the evaporator out.
Figure 95