Siemens SIMATIC ET 200SP Manual page 15

Product overview
2.1 Properties
Note
The IM 155-6 PN R1 cannot be pulled/plugged when the corresponding supply voltage plug is
plugged in.
Note
BusAdapter of the same type
Note that only BusAdapters of the same type are supported on both interface modules.
Accessories
The following accessories can be ordered separately:
• BusAdapter
– BA 2×RJ45 for RJ45 bus connector
– BA 2×FC for direct connection of the bus cable
– BA 2xSCRJ for POF/PCF fiber-optic cable
– BA 2xLC for glass fiber-optic cable
– BA 2xM12 for bus cable with standard M12 plug
– BA 2xLC-LD (Long Distance) for single-mode fiber-optic cables with a maximum length
– BA SCRJ/RJ45 as media converter for POF/PCF fiber-optic cable ⇔ standard RJ45
– BA SCRJ/FC as media converter for POF/PCF fiber-optic cable ⇔ direct connection of the
– BA LC/RJ45 as media converter for glass fiber-optic cable ⇔ standard RJ45 connector
– BA LC/FC as media converter for glass fiber-optic cable ⇔ direct connection of the bus
– BA LC-LD/RJ45 as media converter for glass fiber-optic cable with an LC plug connector
– BA LC-LD/M12 as media converter for glass fiber-optic cable with an LC plug connector
14
of 30 km
connector
bus cable
cable
⇔ standard RJ45 connector
⇔ standard M12 plug or M12 push-pull connector
Interface Module IM 155-6 PN R1 (6ES7155-6AU00-0HM0)
Equipment Manual, 11/2022, A5E51160307-AA