Philips AVENT Plus SCF391 User Manual page 19

5. To remove the cap,
place your hand over the
cap and your thumb in
the dent of the cap.
Heating breast milk
If you use frozen breast milk, let it defrost completely before you heat it.
Note: If you need to feed your baby quickly, you can defrost the milk in a bowl of hot water.
Heat the bottle with defrosted or refrigerated breast milk in a bowl of hot water or in a bottle warmer.
Remove the screw ring and sealing disc from the bottle.
Warning: It is not recommended to use a microwave to warm up breast milk.
Microwaves might alter the quality of breast milk and destroy some valuable nutrients
and may produce localized high temperatures. If you heat up breast milk in the
microwave, only place the container without screw ring, teat and cap in microwave.
Always stir heated breast milk to ensure even heat distribution and check the
temperature before serving.
Choosing the right teat for your baby
Philips Avent Natural teats are clearly numbered on the side, to indicate flow rate. For more information, see
www.philips.com/avent.
Storing the bottles
-
Store all parts in a dry, clean and covered container.
-
Do not leave a feeding teat in direct sunlight or heat, or leave in disinfectant for longer than
recommended because this may damage the product.
-
For hygiene reasons, we recommend replacing the teats after 3 months.
Philips Avent Natural teats are available with different flow rates. The breast
pump comes with teat number 1. This is a 0m+ teat, ideal for newborn and
breastfed babies of all ages.
Use a lower flow rate if your baby chokes often, if milk drips out of its mouth
during feeding or if it has trouble adjusting to the drinking speed. Use a higher
flow rate if your baby falls asleep during feeding, gets frustrated or if feeding
takes very long.
English
19