Standards And Regulations - Siemens LDS 6 Operating Instructions Manual

General information

1.9 Standards and regulations

When opening the packaging, please observe the corresponding information on the packaging
material. Check the delivery for completeness and undamaged condition. In particular, you
should compare the Order No. on the nameplates with the ordering data, if available.
If possible, please retain the packaging material, since you can use it again in case of return
deliveries.
1.9 Standards and regulations
As far as possible, the harmonized European standards were the basis for the specification and
production of this device. If no harmonized European standards have been applied, the
standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.
KC marking for use in Korea only
Device version
A급 기기
Class A device
8
Operating instructions
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하
시기 바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.
This device is classified as having electromagnetic resistance suitable for industrial
use (Class A) and may be used universally, apart from in domestic use.
Operating Instructions, 01/2022, A5E00295894-10
LDS 6