Installation Guidelines; Safety Information - Siemens LDS 6 Operating Instructions Manual

Installation guidelines

3.1

Safety information

It is essential that you observe the given information and warnings!
Electrical Safety
Certain parts inside the gas analyzer LDS 6 carry dangerous voltages.
The housing must be closed and grounded before switching on the analyzer.
Death, personal injury and/or damage to persons and/or property may result if this is not
observed.
Damage to operating staff
Whenever the optics housings are to be opened or disconnected from the process interface or
the gas tubing make sure that any overpressure in the optics housings is removed prior to any
work. Opening optics housings under overpressure may result in dangerous injuries to the
operator.
The device can be used in an industrial environment.
General Information
Insufficient air circulation
Risk of fire.
The device may overheat in case of insufficient air circulation.
● Ensure sufficient air circulation in the room.
LDS 6
Operating Instructions, 01/2022, A5E00295894-10
DANGER
WARNING
WARNING
3
23