Qualified Personnel; Notes On Warranty; Delivery Information; Standards And Regulations - Siemens ULTRAMAT 6F Operating Instructions Manual

1.7

Qualified Personnel

Qualified personnel are people who are familiar with the installation, mounting, commissioning, and operation of the product.
These people have the following qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and systems according to the safety
regulations for electrical circuits, high pressures and aggressive as well as hazardous media.
● For explosion-proof devices: they are authorized, trained, or instructed in carrying out work on electrical circuits for
hazardous systems.
● They are trained or instructed in maintenance and use of appropriate safety equipment according to the safety
regulations.
1.8

Notes on warranty

The contents of this manual shall not become part of or modify any prior or existing agreement, commitment or legal
relationship. The sales contract contains all obligations on the part of Siemens as well as the complete and solely applicable
warranty conditions. Any statements regarding device versions described in the manual do not create new warranties or
modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right to make technical changes in
the course of further development.
1.9

Delivery information

The respective scope of delivery is listed on the shipping documents in accordance with the valid sales contract. These are
enclosed with the delivery.
When opening the packaging, please observe the corresponding information on the packaging material. Check the delivery
for completeness and undamaged condition. In particular, the Order No. on the labels, if present, must be compared with the
ordering data.
1.10

Standards and regulations

As far as possible, the harmonized European standards were the basis for the specification and production of this device. If
no harmonized European standards have been applied, the standards and regulations for the Federal Republic of Germany
are valid.
When this product is used beyond the scope of these standards and regulations, the valid standards and regulations of the
country of the operating company apply.
1.11

Conformity with European directives

The CE mark on the device is a sign of conformity with the following European directives:
Directive for electromagnetic
compatibility
(EMC)
Low voltage directive
LVD
Explosion protection directive
ATEX
The directives applied can be found in the EU declaration of conformity for the associated device.
4
DIRECTIVE 2014/30/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on
the approximation of the laws of the Member States relating to electromagnetic compatibil-
ity.
DIRECTIVE 2014/35/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on
the harmonization of the laws of Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits.
DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on
the harmonization of the laws of the Member States relating to equipment and protective
systems intended for use in potentially explosive atmospheres.
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779389002-01, 09/2018