Special Information And Warnings; Warranty Conditions; Delivery Information - Siemens LDS 6 Operating Instructions Manual

It is addressed to technically qualified personnel who are specially trained or who have the
relevant knowledge of automation technology (measuring and control systems).
Knowledge and technically correct implementation of the safety notes and warnings contained
in this manual are required for safe installation and commissioning, as well as for safety during
the operation and maintenance of the described product. Only qualified personnel have the
required professional knowledge for correctly interpreting the generally valid safety notes and
warnings in this manual in each specific case and to act accordingly.
This manual is an inherent part of the scope of delivery, despite the fact that it can be ordered
separately for logistic reasons.
Due to the variety of technical details, it is not possible to consider every single detail for all
versions of the described product and for every conceivable case in the set-up, operation,
maintenance and use in systems. For further information, or in the case of problems which are
not covered in enough detail in this document, please request the required information from
your local or responsible Siemens regional office.
Note
In particular, before using the device for new research and development applications, we
recommend that you first contact your Siemens representative or our application department to
discuss the application in question.
1.6

Special information and warnings

This manual provides you with information on using, installing, operating, and maintaining the
device.
Pay particular attention to all special information and warnings. Information of this type is set
apart from the rest of the text and is marked with the corresponding pictograms. This
information provides you with useful tips and helps to avoid faulty operation.
1.7

Warranty Conditions

We expressly point out that the product quality is exclusively and conclusively described in the
sales contract. The content of this product documentation is neither a part of a previous or
existing agreement, promise or legal relationship, nor is it intended to modify these. All
obligations on the part of Siemens AG are contained in the respective sales contract, which also
contains the complete and solely applicable liability provisions. The provisions defined in the
sales contract for the responsibility for defects are neither extended nor limited by the remarks
in this document.
1.8

Delivery information

The respective scope of delivery is listed on the shipping documents – enclosed with the delivery
– in accordance with the valid sales contract.
LDS 6
Operating Instructions, 01/2022, A5E00295894-10
General information
1.8 Delivery information
7