Table of Contents
Advertisement
1.7
Qualified Personnel
Qualified personnel are people who are familiar with the installation, mounting,
commissioning, and operation of the product. These people have the following qualifications:
• They are authorized, trained or instructed in operating and maintaining devices and systems
according to the safety regulations for electrical circuits, high pressures and aggressive as
well as hazardous media.
• For explosion-proof devices: they are authorized, trained, or instructed in carrying out work
on electrical circuits for hazardous systems.
• They are trained or instructed in maintenance and use of appropriate safety equipment
according to the safety regulations.
1.8
Notes on warranty
The contents of this manual shall not become part of or modify any prior or existing agreement,
commitment or legal relationship. The sales contract contains all obligations on the part of
Siemens as well as the complete and solely applicable warranty conditions. Any statements
regarding device versions described in the manual do not create new warranties or modify the
existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right to
make technical changes in the course of further development.
1.9
Delivery information
The respective scope of delivery is listed on the shipping documents in accordance with the valid
sales contract. These are enclosed with the delivery.
When opening the packaging, please observe the corresponding information on the packaging
material. Check the delivery for completeness and undamaged condition. In particular, the
Order No. on the labels, if present, must be compared with the ordering data.
1.10
Standards and regulations
As far as possible, the harmonized European standards were the basis for the specification and
production of this device. If no harmonized European standards have been applied, the
standards and regulations for the Federal Republic of Germany are valid.
When this product is used beyond the scope of these standards and regulations, the valid
standards and regulations of the country of the operating company apply.
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
Compact Operating Instructions, 09/2018, A5E45779389002-01
Introduction
1.10 Standards and regulations
11
Advertisement
Table of Contents
