Copying
Copying on letterhead
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Copy From > select the size of the original document > Copy To > select a paper source
If you are loading into the multipurpose feeder, then navigate to:
Copy To > Multipurpose Feeder > select a paper size > Letterhead
For non-touch-screen printer models, press
3
Copy the document.
Copying on both sides of the paper
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Paper Setup
For non-touch-screen printer models, press
3
Adjust the settings.
4
Copy the document.
Reducing or enlarging copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Scale > specify a scale value
For non-touch-screen printer models, press
Note: Changing the size of the original document or output after setting Scale restores the scale value to
Auto.
3
Copy the document.
Collating copies
1
Load an original document into the ADF tray or on the scanner glass.
2
From the control panel, navigate to:
Copy > Settings > Collate > On [1,2,1,2,1,2]
3
Copy the document.
to navigate through the settings.
to navigate through the settings.
to navigate through the settings.
49