Networking - Lexmark CX622 User Manual

Maintaining the printer

Networking

Connecting the printer to a Wi‑Fi network
Before you begin, make sure that:
•
Active Adapter is set to Auto. From the control panel, navigate to Settings > Network/Ports > Network
Overview > Active Adapter.
For non-touch-screen printer models, press
•
The Ethernet cable is not connected to the printer.
Using the wireless setup wizard in the printer
Notes:
•
These instructions apply only to some printer models.
•
Before using the wizard, make sure that the printer firmware is updated. For more information, see
"Updating firmware" on page
1
From the home screen, touch
2
Select a Wi‑Fi network, and then type the network password.
3
Touch Done.
Using the Settings menu in the printer
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Setup On Printer Panel
For non-touch-screen printer models, press
2
Select a Wi‑Fi network, and then type the network password.
Note: For Wi‑Fi‑network‑ready printer models, a prompt to set up the Wi‑Fi network appears during initial
setup.
Using Lexmark Mobile Assistant
1
Depending on your mobile device, download the Lexmark Mobile Assistant app from either Google Play or
App Store.
2
Depending on your printer model, do one of the following:
•
From the home screen, touch Settings > Network/Ports > Wireless > Setup Using Mobile App > Printer
ID.
•
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Setup Using Mobile App
For non-touch-screen printer models, press
Follow the instructions on the display to view the printer ID.
Note: The printer ID is the printer wireless network SSID.
to navigate through the settings.
274.
> Set up now.
to navigate through the settings.
to navigate through the settings.
168