Creating Folders; Managing Contacts; Adding Contacts - Lexmark CX622 User Manual

Setting up and using the home screen applications
For FTP, type the FTP address. For example, myServer/myDirectory. Enter the FTP port. Port 21 is
•
the default port for sending commands.
For SMB, type the network folder address. For example, myServer/myShare/myFile.pdf. Type the
•
network domain name.
•
If necessary, select the Authentication type for FTP and SMB.
To limit access to the bookmark, enter a PIN.
Note: The application supports the following file types: PDF, JPEG, TIFF, and HTML-based web pages.
Other file types such as DOCX and XLXS are supported in some printer models.
4
Click Save.
Note: To manage bookmarks, click Bookmark Setup.

Creating folders

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Bookmark Setup > Add Folder, and then type a unique name for the folder.
Note: To limit access to the folder, enter a PIN.
3
Click Save.
Notes:
•
You can create folders or bookmarks inside a folder. To create a bookmark, see
on page 26.
•
To manage folders, click Bookmark Setup.

Managing contacts

Adding contacts

1
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
2
Click Address Book.
3
From the Contacts section, add a contact.
Note: You can assign the contact to one or more groups.
"Creating bookmarks"
27