Xerox Versant 3100 Press User Manual page 94

Maintenance
a) To remove the feed roll, squeeze both ends of the metal shaft and lift out.
b) To install a new feed roll, squeeze both ends of the new roll shaft, insert and
release the roll ends into the notches.
5. Replace the separator roll:
a) To remove the roll from the assembly, squeeze the shafts of the separator roll
and lift out of the assembly.
b) To install a new separator roll, squeeze both ends of the new roll shaft, insert
and release the roll ends into the notches on the separator roll assembly.
6. Reinstall the separator roll assembly into the tray.
a) Align the cutout holes of the assembly with the frame of the tray so the pin holes
match up.
6-18
® ®
Xerox Versant 3100 Press
User Guide