Install Driver Software - Kodak E1030 Series User Manual

2 Installation

Install driver software

10
While the driver software on the provided disc will work with your
scanner, to assure you have the latest software, please download it
from the scanner's product support website.
You should only use the disc from the scanner box if your computer
does not have access to the internet or you are unable to download
executable files.
NOTE: The disc only contains driver software for Windows Operating
Systems. You must go to the scanner's product support website (below)
to get drivers for other Operating Systems.
1. If your computer has access to the internet, obtain the driver
software from scanner's product website:
-Go to your scanner's product support website:
E1030:
AlarisWorld.com/go/E1030support
E1040:
AlarisWorld.com/go/E1040support
-Scroll to the driver section that matches your computer's Operating
System.
-Select the file to download. For Windows, "Windows – EXE". For
Linux, pick the package that is appropriate for your distribution.
-Run the driver software installer.
2. If you are unable to download from the scanner's product website,
and your computer is running a Windows Operating System:
-Place the disc from the scanner box into the disc drive of your
computer.
-If your computer does not automatically start the installer, browse
to the disc and run set_up.exe.
3. Follow the steps of the "Kodak E1030/40 Scanners" driver software
installation. Be sure to follow the 'Typical' installation in order for
your computer to be properly connected to your scanner and to
verify the scanner is working.
A-61997 1 August 2022