Cleaning The Separation Roller - Kodak E1030 Series User Manual

Cleaning the separation roller

A-61997 1 August 2022
The separation roller should be removed from the scanner for best
cleaning results.
1. Open the scanner cover.
2. Remove the pre-separation pad by grasping it and pulling it straight
out.
3. Grasp the separation roller and pull it straight out.
4. Wipe the separation roller tires with a roller cleaning pad. If there are
grooves in the tires, wipe in the direction of the grooves. The tires on
your model may look different than the tires in this illustration.
4 Maintenance
29