Kodak E1030 Series User Manual page 54

Appendix B Warranty — US and Canada only
How to obtain Limited Warranty service
KODAK Scanners are supplied with information on unpacking, setup, installation and operation. Careful reading of the User's
Guide will answer most of the technical questions the end user might have regarding proper installation, operation and
maintenance of the product. However, should additional technical support be required, you may visit our website at:
AlarisWorld.com/go/imsupport
or contact: Kodak Alaris' Response Center: (800) 822-1414
The Response Center is available Monday – Friday (excluding Kodak Alaris holidays) 8 a.m. to 5 p.m. EST.
Before placing the call, the eligible purchaser should have the KODAK Scanner model number, part number, serial number and
proof of purchase available. The eligible purchaser should also be prepared to provide a description of the problem.
Response Center personnel will assist the end user in resolving the problem over the phone. The end user may be asked to run
some simple, self-diagnostic tests and report the resulting status and error code messages. This will assist the Response
Center in determining if the problem is the KODAK Scanner or another component and if the problem can be resolved over the
phone. If the Response Center determines a hardware problem exists that is covered either under the Limited Warranty or a
purchased Maintenance Agreement, a Return Material Authorization Number (RMA) will be assigned as needed, a service
request will be initiated and repair or replacement procedures will follow.
Packaging and shipping guidelines
Purchaser must ship all warranty returns in a method that guarantees full protection of the product from shipping damage.
Failure to do so will void the KODAK Scanner warranty. Kodak Alaris advises the purchaser to keep the original box and packing
materials for storing or shipping. Kodak Alaris is not responsible for issues related to shipping damage. The purchaser must
return only the KODAK Scanner. Prior to shipment, purchaser must remove and retain all "add-on" items, (i.e. adapters, cables,
software, manuals, etc.). Kodak Alaris accepts no responsibility for these items and they will not be returned with the repaired or
replacement KODAK Scanner. All products should be returned to Kodak Alaris in the original shipping container, or an
authorized packaging box for the units being returned. Purchaser must install the shipping restraint before the KODAK Scanner
is shipped. When the original packaging is not available, contact Kodak Alaris' Response Center at (800) 822-1414 for part
numbers and replacement packaging ordering information.
Return procedure
Eligible purchasers seeking services for KODAK Scanners covered under this Limited Warranty must obtain a Return Material
Authorization Number ("RMA") by calling (800) 822-1414 and within ten (10) business days from the date of issuance of the
RMA must return the KODAK Scanner to the address designated in the RMA at the end user's own expense and risk, in
compliance with Kodak Alaris' current Packaging and Shipping Guidelines.
Any defective products or parts replaced by Kodak Alaris become the property of Kodak Alaris.
Customer responsibility
BY REQUESTING SERVICE, THE ELIGIBLE PURCHASER ACKNOWLEDGES THE TERMS OF THE LIMITED WARRANTY,
INCLUDING THE DISCLAIMER AND LIMITATION OF LIABILITY PROVISIONS. PRIOR TO SEEKING SERVICE, THE END
USER MUST BACK-UP ANY DATA OR FILES THAT MAY BECOME DAMAGED OR LOST. KODAK ALARIS IS, WITHOUT
LIMITATION, NOT RESPONSIBLE FOR LOST OR DAMAGED DATA OR FILES.
Warranty Service descriptions
Kodak Alaris offers a range of service programs to support its Limited Warranty and to assist with the use and care of the
KODAK Scanner ("Service Methods"). A KODAK Scanner represents an important investment. KODAK Scanners provide the
productivity needed to stay competitive. The sudden loss of this productivity, even temporarily, could seriously affect the ability
to meet commitments. Downtime can be very expensive, not just in the cost of the repair but also in time lost. To help alleviate
these problems, Kodak Alaris may use one of the service methods listed below, depending upon product type, in providing
service under its Limited Warranty.
Information about the product, including warranty, service program information, and restrictions, can be obtained online at
AlarisWorld.com/go/imsupport.
To avoid service delays, Kodak Alaris urges end users to complete the Limited Warranty Registration process online at
.
AlarisWorld.com/go/imsupport
Product model and product serial number are required to complete the registration process.
Kodak Alaris also provides a variety of service programs that may be purchased to assist with the use and care of the KODAK
Scanner.
Kodak Alaris is committed to providing its customers with quality, performance, reliability and service under the Limited
Warranty.
We expect to have a supply of spare parts and consumables for at least 5 years after product manufacture has been
discontinued.
46 A-61997 1 August 2022