Connecting To A Monitor; Connecting To A Speaker (With Amplifier); Connecting The Power Supply - BenQ PB9200 User Manual – Operating Manual

PB9200-e.book Page 10 Thursday, May 27, 2004 2:15 PM

Connecting to a monitor

Monitor
RGB in
RGB cable

Connecting to a speaker (with amplifier)

Speaker
Audio in
Stereo Mini cable

Connecting The Power Supply

WARNING
• Use extra caution when connecting the power cord as incorrect or faulty connections
may result in fire and/or electrical shock. Please adhere to the "User's manual – Safety
Guide" and the following.
• Only plug the power cord into outlets rated for use with the power cord's specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1. Connect the connector of the
power cord to the AC inlet of
the projector.
2. Firmly plug the power cord's
plug into the
10 Setting Up
Projector
RGB OUT
Projector
AUDIO OUT
outlet.
AC Inlet
Connector
REMOTE CONTROL
AUDIO IN1
L
AUDIO OUT
AUDIO IN2
CR/PR Ca/Pa
RGB RGB OUT
R/C /P G/Y B/C /P H V
R R B B
R-AUDIO IN-L
BNC
L
REMOTE CONTROL
AUDIO IN1
M
AUDIO OUT
AUDIO IN2
CR/PR Ca/Pa
RGB RGB OUT
R/C /P G/Y B/C /P H V
R R B B
R-AUDIO IN-L
BNC
M
Plug
CONTROL NETWORK
Y
VIDEO S-VIDEO
CONTROL NETWORK
Y
VIDEO
S-VIDEO
Outlet